Relief Carving Tool Set, 5-Piece STRYI Profi Kit for Fine Ornament

 The Woodcarving Tools Set (art.505002)  STRYI Profi is an ideal choice for both beginners and professionals in woodcarving. This set is carefully designed with features that cater to the needs of users at different skill levels. 

In high-end architectural relief and decorative framing, the challenge is maintaining sharp geometry within confined spaces. This 5-piece STRYI Profi SET is a curated mechanical engine designed to bridge the gap between flat backgrounds and high-resolution ornamentation. Featuring a precision 2mm metal profile, these tools are engineered for low-resistance fiber separation, allowing you to execute complex patterns like grape leaves, mirror frames, and decorative panels with the surgical control required for a "tool-finished" surface.

Workshop Logic: The Resolution System

This set is organized to handle the transition from layout to final texture. In a professional workflow, efficiency depends on having the correct angle for every stop-cut. The dual-knife configuration (45° and 70°) allows you to manage entry angles in tight corners where a single blade would cause fiber bruising. The gouge selection provides the mechanical range to clear waste and establish volumetric depth, while the 60° V-tool acts as the "architect's pencil" to define structural shadow lines.

The “Pro-Steel” Advantage

• Hand-Forged W1-7 Carbon Steel: Forged to maintain a refined molecular structure, supporting a razor-sharp apex that slices through wood fibers with zero "diving."

• Professional Hardness: Subjected to a signature 11-stage tempering cycle to reach 60–62 HRC, ensuring elite edge retention through long sessions in both soft linden and seasoned hardwoods.

• 2mm Precision Profile: Specifically chosen for relief work to eliminate the "wedge effect." This thin geometry allows the tool to dive deeper into the timber with significantly less physical force, providing superior tactile feedback for millimetric control.

• Ergonomic Oak Handles: Finished with natural linseed oil, the rounded handle geometry is calibrated for high-friction palm indexing, ensuring stable control during extended carving sessions.

• Stropping Recovery: High-carbon metallurgy is optimized for rapid edge recovery. A few passes on a leather strop are all that is required to bring back a mirror-polished finish.

• Manufacturer-Direct Quality: Produced in our Ukrainian forge with over a decade of metallurgy refinement, ensuring every edge arrives professionally honed.

What’s in the Kit

• Carving Knife 45°, 20mm (Art. 184520): The primary layout specialist. Its 45-degree skew is optimized for establishing deep stop-cuts and reaching into tight geometric corners where visibility is critical.

• Carving Knife 70°, 30mm (Art. 187030): The finishing engine. The 70-degree angle provides a wide shearing edge, ideal for smoothing surfaces and executing clean, cross-grain finishing passes.

• Gouge Sweep #9, 10mm (Art. 100910): The waste-clearance veiner. Designed for deep hollowing, material removal, and creating high-relief organic textures.

• Gouge Sweep #5, 10mm (Art. 100520): The background finisher. Its shallow sweep is the mechanical choice for leveling backgrounds and smoothing transitions between relief levels.

• V-Parting Chisel 60°, 5mm (Art. 106005): The shadow architect. Essential for defining crisp structural outlines and adding high-contrast details like leaf veins or hair textures.